Hogwarts: The Book of Chaos, the Power of Knowledge

Chapter 86



Chapter 86: Making A Wand (Part 1)

Before Colt could finish speaking, Ronald immediately agreed, “No problem, I can wait, it doesn’t matter how long, but, Colt, that, that’s it.”

Ronald didn’t know what to say, although the Weasley family’s current economic situation was indeed much better, and they had some savings.

However, the Weasley couple, who have survived the hard times, obviously will not give their children much pocket money.

As far as Ronald’s current possessions are concerned, there are only a few dozen silver coins when he counts them all. This amount is less than the hardware Galleon, and it is definitely not enough for the cost of a magic wand.

Seeing Ronald’s predicament, Colt said directly: “Forget it, I’m not short of that money, so it’s just an experiment. If the wand I’ve made works well for you, then I’ll give it away in advance. Your Christmas present is ready.”

Colt’s words made Ronald nod his head happily. At this moment, he doesn’t care about his self-esteem. He would be happy if he had a magic wand.

And, more importantly, if the wand made by Colt can be used, at least he doesn’t need to worry about being scolded by his mother 09. The result could not be better, he would dare to ask for something else.

Once the idea of making a DIY wand came up, Colt got into action right away.

In terms of materials, Colt still has quite a few things in his hands. At least the problem with the stick body can be found and used casually in the Golden Crow Realm.

All kinds of trees inside are very complete.

Moreover, these are all materials that have been strengthened by the Golden Crow Realm.

Colt is now thinking about whether to make a wand for himself when he learns to make a wand.

This idea has been completely out of control since it took root.

After all, compared to wands made from ordinary trees, it was obvious that the trees in his Golden Crow Realm were definitely better!

As for the problem of the core of the stick, this is also easy to solve. He may not be able to get the tail feathers of the phoenix, the heart and tendons of the fire dragon, but he has the tail hair of the unicorn!

Besides, whoever said that the core of the rod must use these things, he can use some other things.

For example, Feiyan’s feathers, Yestral’s tail hair, etc. He didn’t have many materials in his hand, but he couldn’t bear to have the entire Forbidden Forest as his raw material reserve.

After having the idea of making a wand, Colt quickly got the relevant production process and points of attention from the alchemy notebook.

Not to mention, there are really many steps to making a wand.

The wand can be divided into two parts, one is the body and the other is the core.

The body part of the stick is relatively easy to handle, but it is only compared with the core of the stick.

His production process and requirements are also very complicated.

First, the wood is processed to give it the shape of a wand.

This step also requires a full understanding of the wood material and texture, and absolutely must not damage the wood fibers used as the rod body, otherwise, everything will have to start from scratch.

So, it doesn’t mean that a random piece of wood can be used to make a magic wand.

How did those wands of different lengths come from, they were formed to avoid damaging the wand fibers as much as possible.

The fibers of some woods are relatively long, and in the end, after careful repair, the rod body is relatively long.

While some wood fibers are shorter, the repaired wand itself will be much shorter.

It can be said that just such a request can make many people scratch their ears for a long time.

Fortunately, Colt has a plug-in. His eyes are directly full of insight. Just need to concentrate, he can clearly distinguish whether the internal fibers of a piece of wood are complete, where is the length of the fibers, and how to repair them.

With the help of God’s Royal Hand, the production of a wand body is relatively simple.

And because of God’s Royal Hand, Colt was able to do a lot more when making the wand body.

For example, add some beautiful patterns to the wand body to make the wand more beautiful and gorgeous.

Well, none of this is of much use, but at least holding a wand like this makes a difference!

And this is not over, the next step is the most difficult, all wands have a core, how to add the core?

That must be the need for the staff maker to take out a space inside where the core of the stick can be placed.

Moreover, while taking out a space for the core of the rod, it is not possible to destroy too many intact fibers.

Although the magic output of the wand mainly depends on the core of the wand, the body of the wand also bears part of the pressure, if the fibers are damaged too much.

When the user started using the wand, there were no major problems.

But with the continuous use of the wand, it is possible that the whole explosion will explode when a magic is cast.

This is not a joke, once such a problem occurs, the reputation of the staff maker will be completely ruined.

No stickmaker dared to joke about this.

After the engraving of the wand body of the wand is completed, it is necessary to prepare the corresponding medicine and soak the wand in it.

On the one hand, this is to ensure the smoothness of the wand for magic power, and it is also to improve the bearing capacity of the fiber.

On the other hand, it is also to improve the toughness of the fiber 273, that is, the number of times the magic power is circulated, which can also be said to be the service life.

It takes at least a week for the medicine to be completely integrated into every fiber in the wood of the stick body.

At this point, the body of a wand is finished.

There is also the core of the wand, not just by pulling the two tail hairs casually and rubbing them together to be used as the core of the wand.

A wand made in that way is a trivial matter to explode from the inside, and it is more likely to cast a few times of magic, and the core of the entire wand will be burned.

Next, when casting the magic spell, the magic spell cannot be released through the wand, and directly acts on the caster himself.

In that case, the fun will be great.

Therefore, the core of the rod also needs to go through many processes.

The first step is to pick out those intact, unscathed magic materials.

Even if it is a slight scratch, this magic material is absolutely unusable.

After choosing, talk about these magic materials, soak them in a kind of potion, and let them restore as much as possible to the most perfect state when they were still growing on the body of the magic creature.

After reaching the best, change to another magic potion rich in magic power. By soaking, it can better adapt to magic power and improve its ability to transmit and bear magic power.


Tip: You can use left, right, A and D keyboard keys to browse between chapters.