Reborn 80s

Chapter 36 MT80
A heavy rain suddenly came and fell unexpectedly, like pouring, and the sky and the earth were hazy.

After this rain, it will also indicate that the heat will officially pass, and it will enter a cool autumn.

Autumn is golden yellow and heralds harvest.

For Chen Huaiqing, this autumn is also a time of harvest.

The official research on the single-cylinder two-stroke air-cooled horizontal engine was successful!
The displacement is 79CC, the rated power is 3.26KW, and the horsepower is about 4.4 horsepower.

As a small-displacement engine, being able to achieve such a power is already considered very good.

Of course, Chen Huaiqing will not admit that the design of the MT79 engine refers to the engine design of other companies.

In this regard, Chen Huaiqing firmly refused to admit it.

Anyway, if there is no reference, who knows.

Furthermore, Huaguo doesn't even have a patent law now.

After the patent law is promulgated, Mota Industry must be the first to apply for various patents.

Not to mention international patents, domestic patents are a must.

The success of the MT79 engine should be attributed to Yuzhou University.Since Yuzhou University offers internal combustion engine courses, it naturally has a lot of accumulation in internal combustion engine technology.

Another point is that those who can now serve as professors in universities, and those who can study for master's and doctoral degrees, really don't have to doubt their strength, they are all very high-level.

Not only the level of knowledge, but also its practical ability is quite strong.

Unlike in the future, many of them belong to the papers that only follow the script and improve their titles.

It doesn't matter whether the paper is good or not, what matters is that the paper is published.

Some journals specialize in the business of publishing papers, and they will publish them as long as they are paid.

All favorable conditions create the MT79 engine.

The MT79 engine is much larger than the engine on the CJ50, so it is naturally impossible to match it.

Chen Huaiqing didn't intend to talk about matching. The MT79 is a horizontal engine, so it is doomed to not be able to engage in straddle motorcycles.

You have to get an underbone motorcycle, or a scooter.

Are there any underbone motorcycles in China at this time?
Construction of the CY80 is still in the works and production has not officially started.

As for the scooter, it is really impossible to do it now.

The shape of the scooter determines that it needs a continuously variable automatic clutch, which is the so-called automatic transmission, and it will go when you refuel, and the brake will not turn off.

Don't do things that are technically difficult, let's start with something simple.

Underbone motorcycles have never been the mainstream in the motorcycle market, Chen Huaiqing naturally knows about this.

Anyway, Chen Huaiqing rarely saw underbone motorcycles in later generations, and usually straddled motorcycles.

So, can underbone motorcycles sell well now?

There should be no problem.

At this time, people have no concept of what kind of motorcycle should be, or in other words, which kind of motorcycle is good.

As long as there is a sale, everyone will buy it.

Jialin Factory is now producing JH70 motorcycle, which is a straddle motorcycle. All parts are imported from Neon Country, and then assembled in Jialing Factory.

As for when the localized replacement of parts will be realized, it is estimated that it will take a while.

After having the engine, it is much easier to do other things.

Mota Industry has designed an underbone motorcycle with red as the main color, named it MT80 motorcycle.

The MT80 underbone motorcycle was designed by Chen Huaiqing himself, mainly in terms of appearance.

Considering that people who buy motorcycles now not only buy motorcycles as a simple means of transportation, but also as a production tool.

In normal times, I use a motorcycle to pull goods, load something or something.

Therefore, MT80 has designed a shopping basket on the front.

The curved beam car has also been reinforced and can hold dozens of kilograms of goods. As for the rear, a cargo rack is installed.

The MT80 motorcycle looks a bit dull. For Chen Huaiqing, who is used to all kinds of trendy motorcycles, it has a retro style.

But everyone else said it looked good.

Some of his aesthetic habits can be added to the design, but the era must also be considered.

Everything is developed step by step, and each era has different aesthetic changes.

It is not so easy to achieve mass production of MT80 motorcycles.

Produce prototypes and determine production plans and processes.

After the prototype was produced, Chen Huaiqing asked people to ride motorcycles to conduct various tests.

The first is the load. There is no problem with carrying four to five hundred catties, and the power is enough.

Of course, after leaving the factory, the user cannot be allowed to carry such a heavy load.

The rated load is given at 140KG.

The MT80 motorcycle can reach a speed of 75 kilometers per hour, which is quite fast in this era.

To be honest, there are very few roads that can allow the speed of the car to run above 60 kilometers.

How long does it take to drive from Chengdu to Yuzhou now?
It takes a few days to go back and forth. (listened to)

While carrying out the prototype test, the production line is also being continuously established.

Mota Industry cannot produce all the parts of motorcycles by itself, so many parts have to be purchased from outsiders.

When designing, the MT80 motorcycle has tried to use common parts.

However, there are still many parts that need to be specially customized.

At the end of September, the MT9 engine was finalized, and it was already November when the MT79 motorcycle prototype was produced.

As the weather gradually turned cold, people's clothes were added one by one.

Chen Huaiqing sat in the room with one hand on the water bottle, the kind of glucose infusion bottle that people like now.

Fill it with hot water and use it as a hand warmer.

I don't know when that kind of electric hand warmer will come out.

Why wait for others to come up with it when you can't do it yourself?
Zhao Yitong walked into the room, seeing Chen Huaiqing's appearance, he couldn't help but sneered: "You said you are a big man, are you so cold?"

Chen Huaiqing looked up at Zhao Yitong, and didn't want to say anything more, the winter of the 80s was much colder than that of the 21st century.

Since the 80s, the global climate has entered a process of warming.

Global warming has become a worldwide concern.

As for the reasons for global warming, there are natural laws and human activities.

Protecting the environment and reducing carbon emissions has become a consensus.

Chen Huaiqing rolled his eyes: "You are not cold, don't wear gloves!"

"Hmph, I wear gloves for work."

That being said, it's not like I'm doing it for work.

"How about the production line?"

The cooperation between Mota Industry and Yuzhou University is not limited to the research and development of motorcycle engines, but also includes motorcycle production lines.

People from Yuzhou University went to the motorcycle production line of Jialin Factory to conduct on-the-spot visits and inspections.

Naturally, it was impossible for Jialin Factory to say that it had set up any obstacles during its visit to Yuzhou University, and it even showed the production line drawings.

It can be said that there is nothing to say and nothing to say.

As for the researchers at Yuzhou University, with these, it would be very easy to create a motorcycle production line!

In fact, it's really not that simple.

Because the production line of the Jialin Factory was imported from Neon Country, some equipment could not be handled domestically.

There is no way, so some advanced equipment on the production line can only be eliminated and completely localized.

Chen Huaiqing also had no objection to this.

The lower the production efficiency, the lower it is.

Now is not the time to consider production efficiency, but to start production.

Mota Industry is already quite tight on funds, and must make money immediately.

Once you have money, try to find ways to improve production efficiency.

Whether it is self-developed or imported equipment from abroad, it is fine.

"My lady, there is nothing I can't handle."

Chen Huaiqing leaned on the chair, as if I just watched you brag.

Indeed, Zhao Yitong participated in the design of the production line, but to say that she is the main force in the design of the production line is pure bragging.

The production line design is led by Zhao Yitong's supervisor, together with a group of postgraduates and doctoral students.

It can be said that this design team is quite good.

In China, it is really difficult to find such a luxurious team.

Chen Huaiqing's requirements for the production line are not high.It is useless to have high requirements. It is impossible to build an intelligent chemical factory now!

Chen Huaiqing thinks very clearly that if the technology of the production line is backward, it will be backward. After continuous investment in research and development, the level of automation of the production line will always be improved.

It is believed that Yuzhou University is very interested in the research on the follow-up upgrade of the production line.

It is a good thing that teaching and scientific research are balanced.

(End of this chapter)